Logic Tech Labs provides specialized engineering services in FPGA development, high-speed electronics, embedded firmware, custom electronic boards, and complete hardware integration.
Looking for an interface board? Browse products
Start with your need
Whether you are starting a product, resolving a technical problem, or looking for an interface board, begin with the option that best matches your current need.
Coordinate architecture, PCB, FPGA, firmware, validation, and manufacturing preparation.
Explore development services 02Get focused support for bring-up, debugging, timing, interfaces, and system integration.
Review integration support 03Browse available LTL boards or define a custom connector-to-connector adapter.
Browse interface productsCore capabilities
Focused technical support for demanding systems, from the first architecture decision through laboratory validation.
RTL architecture, implementation, simulation, timing closure, CDC review, and integration.
Explore capabilityDigital board architecture, signal integrity, power distribution, layout support, and review.
Explore capabilityDrivers, register interfaces, real-time processing, diagnostics, and hardware abstraction.
Explore capabilityPower, clock, interface, FPGA, and firmware validation with laboratory debugging.
Explore capabilityFiltering, acquisition, detection, estimation, imaging, and hardware-oriented algorithms.
Explore capabilityInterface boards, evaluation boards, adapters, test fixtures, and specialized prototypes.
Explore capabilityComprehensive R&D support
Keep hardware, FPGA, firmware, and validation decisions aligned throughout development.
How we workClarify interfaces, performance targets, risks, and constraints.
Develop the board-level and programmable logic architecture.
Connect control, data paths, diagnostics, and host interfaces.
Verify rails, clocks, communication, timing, and system behavior.
Test the complete system against agreed technical requirements.
Prepare files, review production feedback, and support early units.
Selected case study
A practical example of end-to-end delivery across a custom adapter, FPGA RTL, embedded Linux, Ethernet, host software, and laboratory validation.
An end-to-end data-acquisition platform that receives all eight serial-LVDS outputs from an AD9222 evaluation board, reconstructs 12-bit samples in FPGA logic, and moves captured data through embedded Linux to a host computer over Ethernet.
Featured boards
AdapterPN: LTL-ADA-101
Connects HSMC-equipped FPGA development boards to the AD9222 evaluation board for high-speed LVDS data acquisition.
AdapterPN: LTL-ADA-102
Expands an FPGA board’s I/O capability by converting the HSMC interface into configurable general-purpose input/output connections.
AdapterPN: LTL-ADA-103
Connects GPIO interfaces to FMC-compatible FPGA systems, with support for DE2-115 and DE10 development platforms and 50 Ω impedance-matched routing.
AdapterPN: LTL-ADA-104
GPIO-to-parallel-edge adapter supporting DC1620, 50 Ω impedance-matched routing, and data transfer rates up to 4.2 Gbps.
Custom adapter builder
Select the connectors required on each side, define the electrical and mechanical requirements, and submit a structured request for quotation.
Technical insights
A practical engineering guide to the physical interface, source-synchronous LVDS capture, DDR deserialization, framing, clock-domain crossing, and staged verification of an AD9222 FPGA receiver.
12 min read · Logic Tech Labs EngineeringRead guide Interface architectureA practical comparison of HSMC, FMC, and GPIO expansion paths, with a decision process covering electrical standards, bandwidth, clocks, mechanics, pin mapping, and platform portability.
10 min read · Logic Tech Labs EngineeringRead guide FPGA architectureHow to structure a source-synchronous FPGA receiver for multiple serial-LVDS ADC channels, including capture, alignment, deserialization, CDC, monitoring, and verification.
13 min read · Logic Tech Labs EngineeringRead guideWhy Logic Tech Labs
Direct access to engineers who understand how the complete system must work, not only one isolated layer.
About Logic Tech Labs
We work with engineering companies, technology startups, research laboratories, universities, and scientific teams that need focused expertise across complex electronic systems.
Meet your engineering partnerStart with the challenge
Tell us about your system, technical requirements, constraints, and current development stage.